ACCESSORIES

 

SENSOR - (Part # APS1-ARV) - MSRP $50 each

• Reads pressures from 10 - 199 psi
• Weight - .6 oz (19 grams)

Quantity:

INDUSTRIAL SENSOR - (Part #APS1-IND-ARV) - MSRP $95 each

• Reads 10 - 199 psi
• Weight - .6 oz (19 grams)
• For use with large bore industrial valve stems
• Robust electronics for industrial applications with a robust
• Case made with GE industrial plastics.

Quantity:

 

Dash Top Monitor Mounting Bracket - RMRTMB1

Bracket mounts on dash area via Velcro (no screws); Monitor attaches to bracket via Velcro for upright position. (Does not include Monitor)

2 3/4"W x 2 1/4"D x 1 1/2"H

Velcro included

Price: $6.00

---

 

CABLED ANTENNA KIT - (Part #ABPCA-ARV) - MSRP $50

• For use with monopole monitor only
• 35 ft coax cable - one end attaches to monitor and
  other end attaches to 7.5 inch whip antenna (included)

 

FIXED END POWER CORD - (Part #AAPC1-ARV) - MSRP $11

• Connects monitor to 12-volt power outlet
• 8 ft cord

 

STRIPPED END POWER CORD - (Part#AAPC3-ARV) - MSRP $9

• Hard wired to a power source
• 8 ft cord

 

24/12Volt FIXED END POWER CORD - Part #AAPC5-ARV MSRP $12

• Connects monitor to 24-volt power outlet
• Converts power from 24-volt to 12-volt
• 8 ft cord

 

AC/DC WALL PLUG-IN KIT - (Part #AAPACDC-ARV) MSRP $17.50

(converts 110-volt AC to 12-volt DC)

• Kit includes power cord and AC/DC converter
• Power cord connects converter to all monitors and repeater
• Converter plugs into standard 110 outlet
• For use in vehicles that do not have readily available
  12-volt power source
• 8 ft cord
• Not for use with other devices

 

RS232 FIXED END POWER CORD - (Part #AAPC7-ARV) MSRP $15

• Connects to 12-volt power outlet
• Includes RS232 data downloading capability
• 8 ft cord

 

VISOR CLIP/SUCTION CUPS - (Part #AAPVC-ARV) - MSRP $10

• 2 clips per set
• Fits onto monitor from top or bottom for installation onto visor or window

 

SENSOR LOCK NUT KIT - (Part #APSL-2-ARV) MSRP $14.95

• Locks your tire Sensor in place. One package of 6 lock nuts with Small key-chain type wrench for locking to Sensors.

• Must have a minimum of 5/16” thread on valve stem.
• Includes custom wrench and nuts for 10 wheel positions

 

3.5 INCH MONOPOLE ANTENNA - (Part #ABPPM-ARV) - MSRP $10

RAM MOUNT - (for mounting Monitor) - (Part #AAP11-ARV) - MSRP $35.00

• Ram Mount with 2.5” arm and 2 knuckle end plates.
• Allows for direct mounting to vehicle
• Screws allow adjustment of mount at both top and bottom
• Total length and weight: 4” and 6.6 oz.

(Stem is 2.5” with weight of 2.8 oz. Round plates with knuckle ball adds 1.75” to top and bottom)

 

RAM MOUNT SUCTION CUP ATTACHMENT - (Part #AAP12-ARV) - MSRP $20.00

• Suction cup attachment attaches to windows, metal dashes (non-porous surfaces)

• Power suction lever insures secure fastening
• Total length and weight: 3.6 oz and 3.25”

 

RAM MOUNT MOUNTING PAD - (Part #AAP13-ARV) - MSRP $5.50

• 2.43” Diameter double stick mounting pad
• Will stick to all non-porous surfaces

 

RAM MOUNT/SUCTION CUP COMBO - (Part #AAP14-ARV) - MSRP $50.00

• Ram Mount and Suction Cup Combination
• Comes with suction cup attached at one end and a regular round mount plate on the other.

---

EMBEDDED MONITOR BOARD - (Part # EBR34-ARV) - LIST $85.00

Board can be Embedded in other products to accept sensor signals for display.

 

Last Updated Friday, October 30 2009 @ 02:05 PM EDT|1,697 Hits

Copyright © 2009 Pressure Pro Now